Yesterday, Id decided to just leave the globs of cured epoxy sandwiched between the chines and stem as-is. They were hard to reach, and it seemed like it was going to take me forever to make any real progress on them. So, I thought Id just write them off as large, malformed, out-of-control fillets.
That was before I discovered the obvious:
A chisel is very effective at removing cured bits of epoxy.
Certainly it will do it faster than sandpaper or files, which are of course still needed to smooth the surface. For what its worth, I noticed that the epoxy Id thickened with #2 silica is more brittle and breaks away easier than the epoxy Id thickened with mahogany sawdust.
So, with chisel in hand, I once again attacked the biggest glob of epoxy, which is behind the starboard chine. After making a bit of progress with the chisel, I filed away aggressively with a coarse round file. A little more work, and Ill have it reduced to something more acceptable.
Sure, it will still be a large fillet. But it wont be so malformed and out-of-control.
So with that, Ive made a blog post each day this week. I suppose its a fairly representative week in the slow-but-steady progress Im making on the Utility. God willing, Ill be able to put the little boat in the water this year.
0 comments:
Post a Comment