slowly bringing into shape

The shape is finally starting to come along.  The temporary center frame is in place (perhaps temporarily), and I have loosely wired in the stern frame.  The forward frame is under construction as well as the transom. I am hoping that this weekend I can get it all squared up and lock it all in place.



After a couple of hours, I was finally able to get these two forms to horn in accurately at each corner.  The problem was that the bottom panel was 1/4" too far aft.  I used a block of wood and a mallet to persuade it forwards, then reattached the forms til even.  Today, I will finish the forward frame and get the whole thing level prior to installing the transom.  Hope to be able to begin locking the boat together this week.

Related Posts by Categories

0 comments:

Post a Comment