The sixteen foot yurt has lived for over a year without a door. But now that it has a stove, I discovered that the yurt loses heat quickly without a door. Actually, I already knew that, but since my improvements on the yurt tend to be on a just in time basis, having a source of heat made a door imperative. The first stab at a door was to just staple some pieces of vinyl banner to the door frame, but in a wind they were practically useless. So the next step was to build a door with a wooden frame, something more substantial that would actually keep the drafts out.
The stove, blazing away.
The stove pipe now has a hat which keeps the rain out of the pipe but the smoke hole needs some flashing around the pipe so the tarp that covers the hole in the rain doesnt get melted by the heat from the stove pipe.
One of my neighbors at the shop has donated a chair, a mockup for the console/chair for the boat he is building.
And here is the new door, a wooden frame with a piece of plastic banner stapled to the front of it.
And here is a view of the door from the outside. Love that shanty-town look.
Closeup on the latch mechanism. The string goes through a hole on the top and another on the bottom. When outside the door, you pull the top string to pull up the latch or the bottom string to pull the latch down.
By the way, the yurt has now withstood 65 mile an hour winds and survived. Little by little, small improvements make it a better structure. Surprisingly, the most challenging task was how to keep the roof in place since wind going over the top of the roof creates a vacuum which wants to lift the roof cover up and then blow it off. An improved tiedown system did the job.
0 comments:
Post a Comment